ENGINEERING MECHANIC - EXAMPLE 15.2 : A cantilever beam of length L = 3 m carries a uniformly distributed load (UDL) of W = 20 N / m throughout the length. Calculate the bending moment, BM of the beam near the fixed end. What is the shear force, SF at this point? Let SF = -WL, BM = -LWL/2.
ENGINEERING MECHANIC - ANSWER 15.2 : BM near the fixed end = -LWL/2 = -3 x 20 x 3 / 2 = -90 Nm. SF near the fixed end = -WL = -20 x 3 = -60 N. The answer is given by Kang Chuen Tat; PO Box 6263, Dandenong, Victoria VIC 3175, Australia; SMS +61405421706; chuentat@hotmail.com; http://kangchuentat.wordpress.com.
Is This Answer Correct ? | 0 Yes | 0 No |
PROCESS CONTROL - EXAMPLE 6.1 : In a Laplace Transform Table, the Laplace transfer function of f(t) is F(s). When d(t) = f(t) then 1 = F(s). When x(t) = f(t) then X(s) = F(s). If d(t) is the impulse of a spring when d(t) = kx(t), then derive the equation for the impulse of a spring as X(s) in term of k. Next question : A controller has a transfer function a and the other controller has a transfer function b. The overall transfer function of both controllers is ab. What is the transfer function overall when both controllers have similar transfer function 1 / (Cs + k)?
what is Vx-EHT(RED) complex chemical compound.
Question 66 – The drag coefficient Cd = 0.05 and lift coefficient Cl = 0.4 for a levelled flow aircraft are measured. The velocity of the aircraft is v = 150 ft / s with its weight W = 2677.5 pound-force. (a) Find the value of the lift of the aircraft, L, when it is also its weight. (b) The drag of the aircraft, D = Cd M, L = Cl M. Find the value of D. (c) The power required is P = Dv. If 1 pound-force x (ft / s) = 1.356 W, find the value of P in the unit of Watt or W.
hello everyone do anyone have interview questions for any chemical industry please email me at
I have Completed my B.Tech in Chemical Engineering from NIT Raipur, I want to prepare for HPCL Please Suggest me some books for Aptitude, Technical Questions & Please send me Previous Year Question Papers.
PROCESS CONTROL - EXAMPLE 6.2 : A stream with volumetric flow rate Q enters a cylindrical tank and a stream with volumetric flow rate q exits the tank. The fluid has a constant heat capacity and density. There is no temperature change or chemical reaction occurring in the tank. Develop a model for determining the height of the tank, h. Let V is the volume, A is the cross sectional area, r is the density, m is the mass, where V and A are for the tank, r and m are for the fluid. The rate of mass of fluid accumulation, dm / dt = (Q - q) r. Prove the model to be dh / dt = (Q - q) / A.
When using a pumping loop to mix two miscible fluids in a tank, when can the content are considered well mixed?
Question 65 – A differential equation is given as y” + 5y’ + 6y = 0, y(0) = 2 and y’(0) = 3. By using Laplace transform, an engineer has correctly produced the equation L {y} = (2s + 13) / [(s + 2)(s + 3)] = A / (s + 2) + B (s + 3). (a) Find the values of A and B. (b) The inversed Laplace transform of 1 / (s + a) is given by exp (-at) where a is a constant. If the statement : L {y} = 9 L { exp (-2t) } - 7 L { exp (-3t) } is correct, find the equation of y as a function of t as a solution to the differential equation stated in the beginning of this question. When L {d} = 9 L {b} - 7 L {c}, then d = 9b - 7c with b, c and d are unknowns.
Explain the strategies acquired to cure tube vibration and exchangers in a shell?
What is are the main terms in Unit Operations? and what is its charecteristics?
Question 85 - (a) Three genes, I, J and K are available. All these genes are linked with respect to one another. If the percent recombination between I and J is 8 %, that between J and K is 10 %, and that between K and I is 18 %, what is the order of the gene? (b) Twenty six genes, a, b, c, d, e, f, ... x, y and z are available. All these genes are linked with respect to one another. If the percent recombination between a and b is 3 %, between b and c is 3 %, between c and d is 3 %, ... between w and x is 3 %, between x and y is 3 %, between y and z is 3 %, then what is the percentage recombination between b and y?
What is maximum recommend pipe velocity for dry and wet gases?